ABADIDISPATCH

Blog › Equipment

Flatbed Cargo Securement Basics: The Tiedown Rules Every Driver Should Know

By Abadi Dispatch · November 16, 2026 · 2 min read

Flatbed and hotshot freight pays well partly because it takes skill. Securing cargo correctly keeps you safe, keeps the load intact, and keeps you out of trouble at inspections. Here are the basics of the federal cargo securement rules.

Note: This is a simplified overview. Commodity-specific rules apply to things like logs, metal coils, heavy machinery, vehicles, and concrete pipe. Always check FMCSA's cargo securement rules for what you haul.

Working load limit (WLL)

Every strap, chain, and binder has a working load limit, the maximum load it's rated to handle. Under the federal rules, the combined working load limit of your tiedowns must be at least half the weight of the cargo. For example, a 20,000-pound load needs tiedowns with an aggregate WLL of at least 10,000 pounds.

Use equipment that's marked with its rating. Unmarked gear may be treated as having a very low WLL at inspection.

How many tiedowns you need

When cargo isn't blocked from moving forward (for example, by a headboard or other cargo), the minimum number of tiedowns depends on the article's length and weight:

ArticleMinimum tiedowns
5 feet or shorter and 1,100 lbs or less1
5 feet or shorter and over 1,100 lbs2
Over 5 feet, up to 10 feet2
Over 10 feet2, plus 1 for each additional 10 feet or part of 10 feet

Both rules apply. You need enough tiedowns by count and enough total working load limit.

Common securement mistakes

Gear checklist for flatbed and hotshot

Flatbed dispatching

Abadi Dispatch works with flatbed, step deck, and hotshot carriers. We match loads to your equipment and securement gear so you're not sent to a shipper unprepared.